TFCFL 58cc Gas Chainsaw 20 Inch Gas Powered Chain Saw 2-Stroke Gasoline Chainsaw Handheld Chain Saw for Sawing Cutting Pruning and Trimming Wood

Product Description

62cc Chainsaw 20 Bar Powered Engine 2 Stroke Gasoline Chain Saw

This chain saw is sharp to cut the twigs. branches. bushes. shrubs and trees. The saw is waterproof and rustproof. easy to clean with water. With exceptional hardness and durability. it is good for sawing. cutting. pruning and trimming wood. perfect tool for gardening. word working. landscaping.

Structure Chart:

Features:

• Power Source: Gas
• Bar Length: 20 in
• Type: Top Handle Chainsaw
• Automatic Chain Oilier. Chain Brake
• Installation Manual Is NOT Included
• Professional Installation Is Highly Recommended
• Model: 9980

Package includes:

1 xHand saw

1 xFunnel

1 xProportioning pot

Specification:

Pitch: 0.325”

Sprocket: 7T*0.325”

Chain width: 0.058”

Power: 2600W

Gas Displacement: 62CCcm3

Rotating Speed: 12500rpm

Fuel capacity: 550ML

Oil capacity: 260ML

Voltage: 12 V

• Wide Application This chain saw is sharp to cut the twigs. branches. bushes. shrubs and trees. The saw is waterproof and rustproof. easy to clean with water. With exceptional hardness and durability. it is good for sawing. cutting. pruning and trimming wood. perfect tool for gardening. word working. landscaping.
• Guide chain installation step diagram Step1: Install the guide plate; Step2: Install the chain; Step3: Align the holes to install the side cover and screw on the nut; Step4: Adjust the tightness of the chain; Step5: Sleeve lock nut
• Fuel injection volume can be adjusted Step1: Add engine oil. The function of engine oil is to lubricate the chain. so you must wait for the oil to spray out before you can go to the tree. Step2: Add gasoline. The ratio of gasoline to oil is 25:1 or 20:1. 20:1 is recommended.
• Note (must be two-stroke oil. and Mobil two-stroke oil is recommended). Do not use four-stroke engine oil or other engine oil. otherwise it will easily cause cylinder pulling or other problems.
• Usage steps 1. Pull up the flameout switch; 2. Pull out the damper; 3. Pull the start handle. Pull the start handle 3-6 times. When you hear the machine banging. push the damper back in. otherwise the machine will not start; 4. Close the damper.Turn off the air door. pull the start handle 1-3 times again. you can start normally

---

Specifications

Brand

TFCFL